UNIVERSAL - SINGLE SYSTEM TEST STAND

 

Standard Features:

  • Four Pumps
    1. Pressure Compensated Piston Pump
    2. Auxiliary Low Flow Pump
    3. Air over Oil Intensifier Pump
    4. Charge/Supply Pump for Pump Test Unit
  • System Controls
    1. Complete Pressure and Flow Adjustment
    2. Two Each Pressure and Return Ports
    3. Test Quality, Mirror Dial Pressure Gauges for Exact Readings (1500 PSI, 3000 PSI, and 6000 PSI .25% Accuracy) *Gauge Savers on 1500 and 3000 PSI Gauges
    4. Supply and Return Flow (4% Accuracy)
    5. Safety Over Pressure Relief Valve
    6. By-Pass Dump Valve
    7. Flow Shut-Off Valve
  • Auxiliary Low Flow Pump
    1. Will Deliver 3 GPM @ 3500 PSI
    2. By-Pass Dump Valve
    3. Flow Adjustment
    4. Flow Meter
    5. Pressure Adjustment
    6. Pressure Gauge
    7. Dedicated Port
  • Hand Pump
    1. By-Pass Dump Valve
    2. Pressure Gauge
    3. Dedicated Port
  • Ports
    1. Dual Pressure Ports
    2. Dual Return Ports
    3. Dedicated Port
  • Manual 4-Way Directional Flow Control
    Valve for Tested Cylinders
    *Electrical 4-Way Valve with Port Indicator Lights Available
  • Internal Leakage Tester (Low Flow Meter for Testing Internal Leakage of Components .5-4 GPM Standard)
  • Operational Warning Lights
    1. Pressure Filter Condition
    2. Return Filter Condition
    3. Reservoir Low Level
    4. Oil Over Temperature
  • Two Each Isolated Pressure (Stand Alone Pressure Gauges, Pressure Ranges Other Than The Three Main System Gauges) *Suggested Ranges 200 PSI and 1500 PSI
  • Oil Temperature Gauge
    Automatic Oil Temperature Control
  • Additional Features:
    - Over Head Work Sink Lights
    - Test Port for all Pressure Gauges
    - Fluid Sample Port
    - Safety Drip Pan Completely Covers Bottom
    - Work Sink with Perforated Metal Grating
    - 14 Gauge Stainless Steel Construction
    - Heavy Duty Swivel Castors with Floor Locks
  • Dual Test Stand for Testing Components and Pumps
    1. Pressure Systems for Testing Components
    2. Pump Test Unit for Testing Pumps
  • Pump Test Features:
    - The Pump Test Unit (PTU) is Designed for Testing All Fixed and Variable Displacement Pumps
    - The PTU uses the Main Pressure Compensated Pumps to Drive a Hydraulic Motor for the Prime Mover)


Model LT-934-05


Pump Test Unit Features:

  • Adjustable Speed (0-6000 RPM)
    (10,000 RPM Available
  • Reversing Valve
  • Maximum Test Pump Flow (85% of Test Stand's Maximum Flow)
  • 5000 PSI Pressure Systems
  • Charge Pump for Pump Supply
  • Charge Pump Supply Filter
  • Charge Pump Return Filter
  • Condition Warning Lights for Supply and Return Charge Pump Filters
  • Digital RPM Tachometer
  • Supply Port
    A. Supply Throttle Valve
    B. Supply Pressure Adjustment
    C. Pressure Valve (0-400 PSI)
    D. Oil Temperature Gauge
    E. Air Bleed Valve
  • Pressure Port
    A. Load Valve
    B. By-Pass Dump Valve
    C. Pressure Gauge (0-5000 PSI)
    D. Oil Temperature Gauge
    E. Flow Meter
  • Case Drain Port
    A. Load Valve
    B. By-Pass Dump Valve
    C. Pressure Gauge (0-600 PSI)
    D. Oil Temperature Gauge
    E. Flow Meter
  •  

Model By Fluid Type

Mil-H-5606 Mil-H-83282 Skydrol Maximum
Pressure
(PSI)		 Flow
(GPM)		 Reservoir
Capacity
(Gallons)		 Weight
(Pounds)		 Length
(inches)		 Width
(inches)		 Height
(inches)
LT-930-02 LT-930-03 LT-930-05 4000 15 60 2500 86 50 75
LT-931-02 LT-931-03 LT-931-05 5000 25 100 3400 96 65 75
LT-932-02 LT-932-03 LT-932-05 5000 35 150 3800 120 65 77
LT-933-02 LT-933-03 LT-933-05 5000 48 200 4800 130 75 77
LT-934-02 LT-934-03 LT-934-05 4000 60 250 5500 150 85 77
LT-935-02 LT-935-03 LT-935-05 4000 120 450 7500 170 90 77
LT-936-02 LT-936-03 LT-936-05 4000 150 550 8500 180 110 77

Contact LRT's Hydraulic's Engineering Staff
for Complete Drawings and Schematics

Back | Contact Us | Index