SINGLE SYSTEM - HYDRAULIC TEST STAND

Standard Features:

• Three Pumps
  1. Pressure Compensated Piston Pump
  2. Auxiliary Low Flow Pump
  3. Static Hand Pump (10,000 psi)
• System Controls
  1. Complete Pressure and Flow Adjustment
  2. Two Each Pressure and Return Ports
  3. Test Quality, Mirror Dial Pressure Gauges for Exact Readings (1500 PSI, 3000 PSI, and 6000 PSI .25% Accuracy) *Gauge Savers on 1500 and 3000 PSI Gauges
  4. Supply and Return Flow (4% Accuracy)
  5. Safety Over Pressure Relief Valve
  6. By-Pass Dump Valve
  7. Flow Shut-Off Valve
• Auxiliary Low Flow Pump
  1. Will Deliver 3 GPM @ 3500 PSI
  2. By-Pass Dump Valve
  3. Flow Adjustment
  4. Flow Meter
  5. Pressure Adjustment
  6. Pressure Gauge
  7. Dedicated Port
• Hand Pump
  1. By-Pass Dump Valve
  2. Pressure Gauge
  3. Dedicated Port

• Manual 4-Way Directional Flow Control
  Valve for Tested Cylinders
  *Electrical 4-Way Valve with Port Indicator Lights Available
• Internal Leakage Tester (Low Flow Meter for Testing Internal Leakage of Components .5-4 GPM Standard)
• Operational Warning Lights
  1. Pressure Filter Condition
  2. Return Filter Condition
  3. Reservoir Low Level
  4. Oil Over Temperature
• Two Each Isolated Pressure (Stand Alone Pressure Gauges, Pressure Ranges Other Than The Three Main System Gauges) *Suggested Ranges 200 PSI and 1500 PSI
• Oil Temperature Gauge
  Automatic Oil Temperature Control
• Additional Features:
  - Over Head Work Sink Lights
  - Test Port for all Pressure Gauges
  - Fluid Sample Port
  - Safety Drip Pan Completely Covers Bottom
  - Work Sink with Perforated Metal Grating
  - 14 Gauge Stainless Steel Construction
  - Heavy Duty Swivel Castors with Floor Locks